The NCP59748 is dual−rail very low dropout voltage regulator, capable of providing an output current in excess of 1.5 A with a dropout voltage of 60 mV typ. at full load current. The devices are stable with ceramic and any other type of output capacitor ≥ 2.2 uF. This series contains adjustable output voltage version with output voltage down to 0.8 V. Internal protection features consist of built-in thermal shutdown and output current limiting protection. User-programmable Soft-Start and Power-Good pins are available on both QFN and DFN versions. 

The NCP59748 is offered in DFN10 3×3 and QFN20 5×5 packages.

Features 

• Output Current in Excess of 1.5 A 

• VIN Range: 0.8 V to 5.5 V 

• VBIAS Range: 2.7 V to 5.5 V 

• Output Voltage Range: 0.8 V to 3.6 V 

• Dropout Voltage: 60 mV at 1.5 A 

• Programmable Soft-Start 

• Open Drain Power Good Output 

• Fast Transient Response 

• Stable with Any Type of Output Capacitor ≥ 2.2 uF 

• Current Limit and Thermal Shutdown Protection 

• These are Pb−Free Devices Applications 

• Consumer and Industrial Equipment Point of Load Regulation 

• FPGA, DSP and Logic Power Supplies 

• Switching Power Supply Post Regulation

Figure 1. Typical Application Schematic

Figure 2. Simplified Schematic Block Diagram

NCP59748 Datasheet Download